I. precautions in use.1. The new machine shall go through the running in stage before use, and shall not be put into use directly. In the process of "running in", special attention shall be paid to lubrication and maintenance, as well as instrument inspection, and troubleshooting shall be carried out in time in case of any fault.2. When the ambient temperature is lower than 5 ℃, the cooling water shall be heated to 80 ℃ and then added to the water tank, until the water drain interceptor flows ou...
Release date：2019-10-28
Before operation, the grader shall adjust the shovel angle, plane angle, inclination angle and side extension inclination of the blade through the cooperation action of the control lever according to the operation requirements, so as to meet the needs of different working conditions.(1) adjustment of shovel angle Shovel angle is the cutting angle, which refers to the angle between the blade and the ground. Generally, the angle of bulldozer has a certain adjustment range to adapt to different operation ...
Release date：2019-10-28
The small loader cannot move forward or backward. First, check whether there is oil shortage in the gearbox of the small loader and whether the oil inlet pipe is blocked. Then check the gearbox oil pan of the small loader and the filter of the torque converter.If it is found that there are metal fragments and other things in it, it can be sure that the parts in the clutch in the gearbox are damaged. If aluminum chips are found in the transmission oil pan and the torque converter filter of the small loader...
Release date：2019-10-28CONTACT US
PRODUCT CENTER
QR CODE
